Hammer Mill

Hammer Mill

Introduction:

The motor and rotor of this series hammer mill installed on the same base. They are directly connected by coupling. The rotor has been checked by dynamic balance test can rotate in both of forward backward direction.

There are symmetrical operation door and safety interlock in both side. The operation doors are helpful to renewal thieve plate and hammers, also helpful for checking up and debugging. Feed inlet is placed in the top of crusher which can be matched with all kind of feed equipment.
There is one piece of sieve plate installed at the bottom of wood hammer mill. The size of crushed material could be changed by changing different sieve plate with different hole. Normally, the finished size is from 2mm to 30mm adjustable.

Spare parts of hammers and sieve plate are made by our CNC system, through high technical heat treatment.

This series hammer mill has reasonable structure, sturdy and durable using, safety and dependable, simple installation, easy operation, tiny vibrating, high efficiency etc. advantages, which is the most ideal grinding equipment of all kinds of wood chips, wood shavings, grass, straw, stalk, corn, weeds, soybean, PVC foaming board, rubber and so on. 

Technical Parameter:

      Model 

Power (kw)

Capacity (T/H) 

GXP65x27

22-37

0.5-1

GXP65x55

37-55

1-2

GXP65x75

55-75

1.5-2.5

GXP65x100

90-110

2-3.5

GXP130x55

160

3-4

GXP130x100

220

3.5-5

 

 Hammer Mill

Dual Rotor Hammer Mill introduction

On the basis of inherited traditional grinder advantages, our Dual Rotor Hammer Mill is designed by the modern latest smash theory. It has dual rotors, double tangent speed impact, crushes materials instantly. It avoids problems such as Circulation and sieve blocking which single rotor hammer mill will meet. With same power, its capacity will be more than 30% higher than single rotor hammer mill and power consumption lower 3-4kw for crushing per ton material. It has the incomparable advantages compares with the traditional hammer mill.

Set the adjustable break-circulation device, suitable for varied materials with optimization function. Double crushing rooms, double rotors, simultaneously positive and negative rotation, high open porosity sieve instant smash, reduce the production of intermediate particles, no sieve blocking phenomenon. No material circulation during crushing process. The materials rotate with circulation phenomenon completely disappeared.

Fully optimized hammer arrangement, greatly reducing the number of hammer; hammer adopted special abrasion resistant treatment technology, lengthening it lifetime. Adjustable space between hammers and sieve plate.

All kinds of precise detections such as the high-precision dynamic balancing, ensure more stable operation, no vibration, lower noise, better performance; The slide rails-style door opening structure, linkage dual pressure screening agencies, make the operation more user-friendly, more convenient.

It is widely used for all kinds of wood chips, wood shavings, grass, straw, stalk, corn, weeds, soybean, PVC foaming board, rubber and so on. 

Technical Parameter:

      Model 

Power (kw)

Capacity (T/H) 

 

GXPSS-Q80×100

90×2

3-4

110x2

4-5

132x2

5-6


Hammer Mill

Certification 

Hammer Mill 

Other products to recommend

 

 Hammer Mill

                                            rattler-drying machinery                                      

 

Hammer Mill  Hammer Mill

                                    wood pellet mill                              wood chipper

 

Please leave your contact information and all your requirements to us, so that we could get in touch with you in time.

Title:
Company:
Address
Name:
Phone:
Skype:
Email:
Message: